Stainless Steel Products

We are the leading manufacturers and suppliers of the Stainless Steel 304 Pipes.

Kindly send your inquiries to sales@maharashtrametal.co.in

Other details:

Other details:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

321 STAINLESS STEEL BAR

The key feature of 321 stainless is its resistance to intergranular corrosion. It contains titanium, which stabilizes against chromium carbide formation. This material is also stronger than 304 stainless.

Applications

• Jet engine parts
• Heat treated parts
• Expansion Joints
• Turbosuperchargers
• Exhaust manifolds.

Typical Chemical Properties

Maharashtra Metal (India) sources worldwide for its stainless steel bar products. Because we maintain a deep inventory at strategically-positioned locations nationwide, you are assured of on-time delivery.

All material meets ASTM or AMS specifications with ultrasonic testing as required. Test certificates are maintained to ensure full material traceability. A complete menu of processing services that include band sawing, grinding, heat treating and trepanning are available. Contact us today for all of your stainless bar needs.

Kindly send your requirement to sales@maharashtrametal.co.in

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

We are the leading supplier of the Stainless Steel Round Bars 309S.

Kindly send your inquiries to sales@maharashtrametal.co.in

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

We are the leading manufacturers and suppliers of the Stainless Steel Pipes Grade 304.

17-4PH Stainless Steel Bar Precipitation Hardening also known as Type 630 is a chromium-copper precipitation hardening stainless steel used for applications requiring high strength and a moderate level of corrosion resistance. High strength is maintained to approximately 600 degrees Fahrenheit (316 degrees Celsius).

 

General Properties:

• Alloy 17-4 PH is a precipitation hardening martensitic stainless steel with Cu and Nb/Cb additions. The grade combines high strength, hardness (up to 572°F / 300°C), and corrosion resistance

• Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved

• The grade should not be used at temperatures above 572°F (300°C) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to Alloy 304 or 430

Other details:


Corrosion Resistance:

• Alloy 17-4 PH withstands corrosive attacks better than any of the standard hardenable stainless steels and is comparable to Alloy 304 in most media

• If there are potential risks of stress corrosion cracking, the higher ageing temperatures then must be selected over 1022°F (550°C), preferably 1094°F (590°C). 1022°F (550°C) is the optimum tempering temperature in chloride media

• The alloy is subject to crevice or pitting attack if exposed to stagnant seawater for any length of time

• It is corrosion resistant in some chemical, petroleum, paper, dairy and food processing industries (equivalent to 304L grade)

Other Information:

• Pay Mode Terms: T/T (Bank Transfer)

Kindly send your inquiries to sales@maharashtrametal.co.in

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

Material Notes:

 

• Molybdenum content increases resistance to marine environments. High creep strength at elevated temperatures and good heat resistance. Biocompatible. Fabrication characteristics similar to Types 302 and 304.

Applications:

• Food and pharmaceutical processing equipment, marine exterior trim, surgical implants, and industrial equipment that handles the corrosive process chemicals used to produce inks, rayons, photographic chemicals, paper, textiles, bleaches, and rubber.

Corrosion Resistance:

• Better corrosion resistance than 302 and 304; resists sodium and calcium brines; hypochlorite solutions, phosphoric acid; and the sulfite liquors and sulfurous acids used in the paper pulp industry.316 Bar
• Bright Drawn
• Smooth Turned
• Bright Ground
• Rough Turned
• 316 Stainless Steel: Hexagon bar.
• 316 Stainless Steel Flat bar:
• Hot Rolled
• Rolled Edge
• 316 Stainless Steel: Square bar
• 316 Stainless Steel: Angle

304 Stainless Steel

We are suppliers of 304 and 304L Stainless Steel in a wide range of bar, flat, sheet, plate, angle and seamless tubing and pipes. Reliable local and nationwide delivery.

Stainless steel types 304 and 304L. Type 304 is the most versatile and widely used stainless steel. It is also known as 18/8 from the nominal composition of type 304 being 18% chromium and 8% nickel.

The most versatile and widely applied of the 300 series Stainless Steels. It has excellent forming and welding characteristics. AISI 304 stainless can be deep drawn more severely than Types 301 and 302 without immediate heat softening, a characteristic that has made this grade dominant in the manufacture of drawn stainless steel parts such as sinks, splashbacks and saucepans.

Type 304 stainless steel also has outstanding welding characteristics. Post-weld annealing is not required to restore the excellent performance of this grade in a wide range of mildly corrosive conditions.

Type 304L does not require post-weld annealing and finds extensive use in heavy gauge components where freedom from carbide weld precipitation is often required.

All stainless stock can be delivered as per your requirement, Call for details.

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

Owing to our rich industry occurrence and acquaintance, we are involved in manufacturing, supplying and exporting a broad range of SS Tubes 202. Finds their usages in several industries like fluid & gas transport and structural applications, these products are precisely-engineered under the guidance of our professionals. Used for conveyance of fluids for high temperature, our offered tubes are manufactured in adherence with the industry set norms.

 

Specifications:

• MOC: Stainless steel
• ASTM/ASME SA312 Gr. 202, 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
• ASTM/ASME SA358 CL1 & CL3 Gr. 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 321, 321H, 347
• Available in various dimensions & grades

 

User Industries:

• Chemicals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal

 

Specifications:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

Stainless Steel Tubes are often used in applications that require rigid materials for potable water conveyance. Manufacturers select stainless steel because certain manmade materials have unwanted or unknown exposure effects while stainless steel has many desirable qualities for maintaining clean water. Steel tubes can also be used for structural support in buildings and vehicles. The terms “tube” and “pipe” are generally interchangeable, although technically, “tube” implies heightened engineering qualities. Tubes are generally manufactured based on standardized sizes.

Manufacturing Steel Tubes:

• There are three main methods of manufacturing tubing that lend their names to tubing classifications.
• Seamless steel tubes are produced through extrusion. Extruded tubes can be formed in a hot or cold process. Long sections of steel bar are forced through a die that blocks out the intended shape of the tube.
• This method involves passing a rolled sheet of steel through two weld rollers. The weld rollers have a groove around their circumference, through which the steel roll passes. There is a contact at the roll seam that transmits electricity at a high enough current to weld the seam closed. The resulting weld is very small. Drawn-over-mandrel (DOM). A mandrel is a small piece of metal inserted into the tube to define a shape. It gives the tube extra support to prevent unwanted wrinkling during drawing. The tube is passed through a die that has a smaller diameter than the current tube size. As the tube is drawn, it shrinks to match the size of the die’s diameter. This process allows for tight tolerances and specifications. Each of these manufacturing processes allows manufacturers the ability to form varying tube shapes and sizes. Tubes are not always cylindrical, and can be made in triangle, square or other polygonal shapes. Steel tubes destined for certain applications require extra processes as well. Applications involving hydrogen must be factory pre-cleaned or certified as instrument grade due to hydrogen’s reactive characteristics that can cause metal embrittlement or even explosions. Generally, a steel tube manufacturing process is chosen for its interaction with the type of steel to be used. Certain types of steel react poorly to heat because of carbon content, so they can’t be easily welded. Steel types also play a role in decisions regarding use in volatile applications.

Steel Tube Applications:

• Steel tubing is used in high numbers in plumbing applications. The reasons are threefold. One, stainless steel is very sturdy, composed of 80-90 percent steel and 10-20 percent chromium. Steel tubing can handle the types of pressures exerted by water upon plumbing structures. Additionally, the surface of stainless steel does not allow for much adherence by particles or bacteria, so purification processes will not pass on unintended detritus. Finally, steel does not contaminate drinking water.
• Steel tubes are also used in a wide variety of structural applications, such as industrial and residential construction. Examples include fences, gates, railings, playground and athletic equipment. Steel is often used for construction tubes over other metals like aluminum when extra stress resistance is necessary.

Standard:

• ASTM/ASME A/SA/269/213/249

Grade:

• 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

We have been able to cater to the various requirements of clients by providing a wide array of SS Round Bars. Caters to the needs of various industries like petrochemical, chemical and commercial, these products are manufactured with precision. Used as pipes and fittings, our offered range is widely appreciated by our customers' for resistance against abrasion & corrosion and high tensile strength.

 

Specifications:

 

• ASTM/ASME SA 276 TP 304, 304 L, 309 S, 309 H, 310 S, 316, 316 L, 316 TI, 317, 321, 347, 410, 420, 430, 431, 440 A, B & C, 446
• ASTM/ASME SA 479 TP 304, 304 L, 304 H, 309 S, 309 H, 310 S, 310 H, 316, 316 H, 316 L, 316 TI, 317, 321, 321 H, 347, 347 H, 410, 430, 431 & 444
• MOC: Stainless steel

 

User Industries:

Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal.

The following table represents size range, product standards and material grades of Round Bars:

316 Stainless steel tube

• OD: 6-630mm
• W.T: 0.2-30mm
• Length: Can be customized
• Standard: ASTM A554, A249, A269, A270, A312, etc.
• Product description: We are dealing in 316L 316 stainless steel tubes in a wide range sizes, surface treatment, and ASTM standards (A249, A269, A312, A268, A270, A554, etc).

These grades of austenitic stainless steels are similar to304 and 304L, but with the addition of molybdenum. The addition of molybdenum improves the alloys corrosion resistance, particularly with higher resistance to pitting and crevice corrosion in chloride environments.

Contact for the price !

Kindly send your inquiries to sales@maharashtrametal.co.in

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

With sound business practices, we are manufacturing, supplying and exporting excellent quality array of Stainless Steel Strips. Manufactured at our state-of-the-art infrastructure unit with the aid of sophisticated machinery and technology, these strips are offered in various specifications as per the requirements of our clients.In addition, our range of strips is thoroughly checked on various parameters to ensure the quality at par with international standards.

 

Following are the features of our range of stainless steel strips:

• High-tensile strength
• Dimensionally accurate
• Corrosion resistant

Kindly send your inquiries to sales@maharashtrametal.co.in

Specifications:

• Material: Q195, Q235, 08AL, 08YU, SPHC, SPCC
• Thickness: 0.3mm - 6mm
• Thickness tolerance: +/-0.03mm
• Width: 20mm-400mm
• Width tolerance: +/-0.15mm
• Surface treatment: bright finish/dull or black finish

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai

Features of Stainless Steel Coil:

• Accurate dimension
• Suitable for heavy duty operation
• Sturdy build
• Minimum maintenance
• Excellent service life
• Manufactured Using
• Non Corrosive
• Heat Resistant
• Nonmagnetic Steel

Specifications of Stainless Steel Coil:

 

• Standard: ASTM A240, JIS G4304, G4305, GB/T 4237, GB/T 8165, BS 1449, DIN17460, DIN 17441
• Grade: 200series&300series&400series
• Thickness: 0.4 mm-50 mm
• Width: 1000/1219/1500/1800 mm
• Length: 1meter min
• Surface finish: 2B, BA, 8K, 6K, Mirror Finished, No.1, No.2, No.4, Hair Line with PVC
• Manufacture technology: cold drawn/cold rolled/hot rolled
• Coil weight: 5000 kg Max

Applications of Stainless Steel Coil:

 

• Automotive:Automotive trim and molding/Difficult-to-form exhaust-system components, tubular manifolds, mufflers/Exhaust manifold and other exhaust-system components, catalytic converter shells, clamps
• Construction: Gutters and downspouts, roofing, siding
• Kitchenware: Cooking utensils, dishwashers, ovens, range hoods, refrigerators, skewers
• Chemical processing: Oil refinery equipment, oil burner and heater parts
• Appliances: Hot water tanks, residential furnaces
• Power generation: Heat Exchanger tubing
• Farming:Dry fertilizer spreaders/Farm animal pens

Packing Information of Stainless Steel Coil:

• Coils are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

 

• Pay Mode Terms: T/T (Bank Transfer)

We are counted among the most distinguished organizations engaged in catering to the varied requirements of our clients by offering S.S. Rods. Petrochemical, chemical, petrochemical and commercial are some of the industries, where our rods are extensively utilized. Resistance against corrosion, dimensional accuracy and high tensile strength are some of the features of this product.

 

Specifications:

• ASTM/ASME SA 276 TP 304, 304 L, 309 S, 309 H, 310 S, 316, 316 L, 316 TI, 317, 321, 347, 410, 420, 430, 431, 440 A, B & C, 446
• ASTM/ASME SA 479 TP 304, 304 L, 304 H, 309 S, 309 H, 310 S, 310 H, 316, 316 H, 316 L, 316 TI, 317, 321, 321 H, 347, 347 H, 410, 430, 431 & 444
• MOC: Stainless steel

Over the years of experience in the industry, we have been able to provide the customers with an astounding assortment of Stainless Steel Coils. Used to manufacture various instruments and equipment for various industrial applications, these products are manufactured under the able guidance of our experts.

 

Features:

 

• Resistance against heat
• High tensile strength
• Ability to withstand any amount of stress

 

Specifications:

 

• Available in various diameters and lengths
• Stainless Steel: ASTM A240/A240M/A480/ASME SA 240
• Types: 304, 304 L, 304 H, 316, 316 L, 316 Ti, 321, 321 H, 317, 317 L, 310, 310S, 409, 410, 420, 430
• MOC: Stainless steel

 

Finishes:

 

• 2D
• 2B
• 2BA
• BA
• Pol
• Mill Finish
• Painted
• Alloys/Grades
• 201
• 301
• 304
• 304L
• 309
• 310S
• 316
• 316L
• 317
• 317L
• 321
• 347
• 409
• 410
• 410S
• 430
• 434
• 439
• 904L
• Alloy 20
• Duplex 2205
• Tempers
• Annealed
• Tempered
• DQ
• DDQ

Gauges/Thickness:

• We offer stainless steel coils in a variety of gauges from .002 to .135

Stainless Steel Coil Sizes:

 

• 3" to 20" ID and up to 76" maximum OD

Kindly send your inquiries to sales@maharashtrametal.co.in

From the day of commencement, we are engaged in catering to the variegated requirements of the customers by bringing forth a comprehensive Stainless Steel Channels. Durable in nature, the taper channels manufactured by us are available in various specifications as per the requirements of our clients. These products provide a proper passage to liquid by decreasing the diameter of flow and increasing the pressure at one end.

 

Features:

• Standard size and thickness
• Better service life expectancy
• Rustproof
• Can withstand in every climatic condition
• Easy to implement
• Requires no maintenance

 

Specifications:

Kindly send your requirement to sales@maharashtrametal.co.in

We are counted among the most distinguished organizations engaged in manufacturing, supplying and exporting a comprehensive assortment of Stainless Steel Wires. Robustly constructed, our offered wires are available in various dimensions and applications as per the needs of customers. Utilized in the process of machinery making and electronics, these products are thoroughly tested on various characteristics.

 

Features:

 

• High tensile strength
• Sturdy design
• Low maintenance
• Corrosion resistance

Kindly send your requirement to sales@maharashtrametal.co.in

Grades:

• 202, 304, 304L, 310, 316, 316L, 321, 409L, 410, 430, 436L, 439, 441 Conforming to ASTM and Other International Standard

Finishes:

• As Welded
• Welded & Externally Polished
• Welded Cold drawn Annealed & Pickled
• Welded Cold drawn Annealed Pickled & Externally Polished
• Mirror Finish
• Other Finishes as per Customers requirement

Ordering Informations:

• Material Grade
• NB Pipe size of Outside Diameter
• Size of Section
• Wall thickness
• Length Random / Standard / Specific
• Required Finish
• Relevant Specification
• Application End use
• Stainless steel pipes are used in constructions, food industry, pharmaceutical industry, petrochemical industry, automotive industry, municipal and decorative purposes

Specifications:

 

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

Benefits of using Type 316L Stainless Steel:

• Low carbon content eliminates carbon precipitation in the welding process
• Can be used in severe corrosive environments
• Improved anti–corrosion scope due to added Molybdenum
• Weld annealing only required in high stress applications
• Very similar to Grade 316 in chemical composition and mechanical properties

 

Standards:

 

• ASTM 316L Sheets
• UNS S31603 Sheets
• EN number 1.4435 Sheets
• W.Nr. 1.4435 Sheets
• DIN 2 Cr, Ni, Mo 18143 Sheets
• SS 2353 Sheets
• AFNOR Z2 CND 17.13 Sheets
• BS 316S13 Sheets

We are a well-recognized manufacturer and supplier of SS 316 Grade UNS S31600 Pipe. This grade of SS 316 Grade UNS S31600 Sheets is regarded as the second most popular form of steel in the arena of their industrial applications. SS 316 Grade UNS S31600 Sheets exhibit excellent heat resisting property with superior corrosion resistance when exposed to many types of chemical corrodes and also has a superior creep strength at elevated temperatures.

These SS 316 Grade UNS S31600 Sheets find their applications in:

• Marine Fittings
• Heat Exchangers
• Dairies And Breweries
• Food Preparation Areas
• Pharmaceutical Equipment
• Coastal Architectural And Fittings

Other details:

• Grades: ASTM 240 GR.TP 304, 304L, 316, 316L, 316Ti, 309, 310s, 317L, 321, 347, 409M, 410S, 410, 420, 430, 431, Etc

 

We are instrumental in catering to the variegated requirements of the customers by bringing forth uniquely designed SS Sheets. Developed and designed in adherence with the highest benchmarks of quality, our offered SS sheets are available in various dimensions and specifications as per the requirements of our clients.

 

Other details:

 

• Thickness: 0.4mm-60mm
• Width: 1000/1219/1500/2000

 

Features of Stainless Steel Sheet/Plate:

 

• Accurate dimension
• Minimum maintenance
• Excellent service life
• Non Corrosive
• Heat Resistant

 

Specifications of Stainless Steel Sheet/Plate:

 

• Material: 200 series & 300 series & 400 series
• Standard: JIS, AISI, ASTM, GB, DIN, EN

 

Thickness:

 

• Cold rolled:0.4mm-10mm
• Hot rolled: 3.0mm-60mm
• Width: 1000/1219/1500/2000mm
• Length: as customer’s requirement
• Surface: 2B, BA, No. 1, etc.
• Technical processing: Hot Rolled/Cold Rolled

 

Decorative:

 

• Mirror, HL NSP, bead blast, vibration
• HL gold, mirror gold, vibration gold NSP
• No.4 copper NSP, mirror copper, bead copper
• HL brass, mirror brass, bead brass
• HL Black, mirror black, bead black NSP
• HL bronze, mirror bronze, vibration bronze
• Mirror etched, HL etched copper, mirror black etched, mirror etched gold

 

Applications of Stainless Steel Sheet/Plate:

 

• Escalator, elevator, doors
• Furniture
• Production tools, kitchen appliances, freezers, cold rooms
• Auto parts
• Machinery and packaging
• Equipment and medical devices
• Transport system

User Industries:

 

• Chemicals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Technology & Personal

Product Range:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Maharashtra Metal (India) supplies Stainless Steel Wire Rod that available in different diameters and specifications. We stock large range of all type of bars. We are major supplier of stainless steel round bars for many small and large scale industries. We believe in quality and we strive to provide exceptionally good quality bars and other stainless steel products to our domestic and international clients. Our range of stainless steel wires & bars are used to manufacture automotive products, balls & taper roller bearings, braiding hoses, chains, conveyor belts, filters, free cutting wires, fasteners and wire nails, flexible connectors, kitchen ware and gadgets, mig & tig welding, needles, pins, sieves, spokes, springs, surgical equipments, scrubber / scouring pads, steel wool, utensils, woven & knitted wire cloth, wall ties & tying wire, wire ropes, welding electrodes and fillers etc. Annealed wires are also used for redrawing.

Standard:

 

• ASTM / ASME SA 276, ASTM / ASME SA 479 Grades : TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 TI, 317, 321, 321H, 347, 347 H, 410, 410, 420, 430, 431 & 444.

Other details:
Other details:

• Rod coil is sold worldwide and is used as feedstock by our customers for manufacture into bar and wire related products. These products are then further engineered for use in a diverse range of end use applications ranging from aerospace and automotive through to medical implants.
• The Rod Mill manufacturing programme consists of austenitic, duplex, ferritic & martensitic grade rod coil. ASR produces a wide range of grades and sizes of rod of which a significant proportion are “niche” products. The programme of round rod production is complemented by an extensive range of square, hexagon and flat profiles.
• Investments in the Rod Mill manufacturing facilities in recent years have focussed on increasing product range capability and quality. Through these investments rod finishing facilities have been arranged in order to provide the highest quality whilst retaining a high level of flexibility.
• Rounds: 5.0 - 27.0 mm
• Squares: 9.0 - 24.0 mm
• Hexagons: 9.0 - 27.0 mm
• Flats: 17.0 - 35 mm x 4.5 - 14 mm

Other details:

 

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

User Industries:

• Chemicals, Fats & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal

 

Product Range:

Stainless Steel Flat Bars, is a hot rolled stainless shape is ideal for all applications where greater strength and superior corrosion resistance is required. 304 Stainless Flat has a durable dull, grainy mill finish and is widely used for all types of fabrication projects that are exposed to the elements. Stainless Flats 1/2" thickness and under are sheared and edged, thicker sizes are a true bar. True bar is available on request for thinner sizes. This material is mill finish, NOT Polished.

Specifications:

• ASTM A276, QQS-763, T304, non-polished finish
• AKA: stainless strip, stainless bar, stainless rectangle
• Applications: frame work, braces, supports, plates, marine, food, etc.
• Workability: Easy to Weld, Moderate Cutting, Forming and Machining.
• Mechanical Properties: Brinell = 170, Tensile = 85,000 +/-, Yield = 34,000 +/-, Nonmagnetic
• How is it Measured? Thickness (A) X Width (B) X Length
• Available Stock Sizes: 2ft, 4ft, 6ft, 8ft, 12ft, or Cut to Size
• 304/304L, 316/316L, 303, 410, 416, 17-4 and more!
• True flat bar and sheared & edged available
• Cold drawn flat bar available in some grades and sizes
• DFARS or domestic material available in many sizes
• We will custom saw cut to length
• Polishing services are available

Other Details:

• All Stainless Steel Flat Bar is available in lengths of up to 4 meter or can be cut to lenghts of less than 4 meters.
• All Flat Bar comes in a Hot Rolled Annealed and Pickles finish. It is a 2B Mill type finish.
• We offer stainless steel flat bar in two finishes, hot rolled annealed and pickled (HRAP) and slit rolled edge (SRE). Hot rolled annealed and pickled finished stainless steel flat bar goes through quite a process. First it is rolled on a hot strip mill (hot rolled).
• Producing slit rolled edge stainless steel flat bar is particularly a specialist service provided by Midway Metals using our slit rolled edge flat bar machine. The machine flattens, straightens, edges and cuts stainless steel flat bar in any width from 20 to 200mm. The biggest benefits for our customers are that we can now produce stainless steel flat bar faster than ever, and that we can provide lengths from 2-6 metres as the customer requires.
• Stainless steel flat bar is divided into two primary groups – true flat bar and sheared and edged bar. True flat bar is usually in the HRAP condition, though it may sometimes be cold drawn. This bar has fairly sharp corners and tighter tolerances on thickness and width than sheared and edged, and is often used by fabricators where the finished project is polished. Sheared and edged material is cut from plate, and then put through a process which straightens the bars and cleans up the edges. This is a much more cost effective way to buy a flat bar when corner sharpness and tolerances aren’t critical. The standard lengths of true bar are 12’-14’ random lengths, while sheared and edged bars typically come in 12′ dead lengths.
• If you don’t see what you’re looking for just call! We specialize in locating hard to find items.

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: READY STOCK

Backed by a team of dexterous professionals, we have been able to provide the customers with a remarkable gamut of Stainless Steel Fittings. Used to connect, divert or close the pipe ends, these fittings are manufactured in adherence with the international quality standards to assure leak-free joints.

 

Other details:

 

• Sizes: 1/8” to 1”
• Profiles like NPT, BSPP & BSPT
• Straight connections
• Branch connections
• Tee and cross connections in male thread connections
• Female thread connections
• Male – Female thread connections

 

Material of Construction:

 

• Steel, SS-304, SS-316
• Brass
• Monel
• Hastelloy
• Inconel
• Titanium

 

Material conforming to NACE MR 01-75:

Pipes & fittings:

 

• Hex long nipple
• Reducing hex. nipple
• Close nipple
• Hex coupling
• Reducing hex coupling
• Pipe adapters
• Reducing adapter
• Gauge adapter
• Reducing bushing
• Pipe caps
• Pipeline plugs
• Male elbow
• Female elbow
• Street elbow
• Reducing street elbow
• Male tee female tee
• Male run tee
• Male branch tee
• Female cross

Tube fittings:

 

• Equal union bulkhead union
• Reducing union
• Female connector - NPT
• Female connector - BSPT
• Male connector - NPT
• Bulkhead male connector - NPT
• Bulkhead female connector - NPT
• Flange connector
• Pipe weld connector
• Tube socket weld connector
• Male connector - BSPT
• Port connector
• Reducing port connector
• Lap joint flange connector
• 45’ Male elbow - NPT
• Union elbow
• Male elbow - BSPT
• Female elbow - BSPT
• Union elbows
• Union tee
• Female run tees - NPT
• Male run tee – NPT
• Female run tee - NPT
• Female branch tee - NPT
• Male branch tee – NPT
• Bulkhead port reducer
• Port reducer
• Union cross
• Male port adapter – NPT
• Female port adapter - NPT
• Male elbow - NPT
• Female elbow - NPT
• Pipe weld elbow
• Tube socket weld elbow

Other Information:

 

• Pay Mode Terms: T/T (Bank Transfer)

 

 

SS316 Stainless Steel Tubes Size Range:

• MM OD Tubes: 4 mm - 60 mm OD Stainless Steel SS316 Tubes
• Inch OD Tubes: 1/4"- 1-1/2" OD Stainless Steel SS316 Tubes

SS316 Stainless Steel Tube finish Range:

• Annealed and Pickled
• Polished (320 GRIT)

MO 2.5 SS316 Tubes (Minimum 2.5% Molybdenum content):

• In addition to standard stainless steel tubes, Chuan Kok Hardware & Machinery Pte Ltd also carries tubes with a minimum 2.5% Molybdenum content

Specifications and Grades:

• ASTM/ASME A/SA106 B/C
• ASTM/ASME A/SA 53 B
• ASTM/ASME A/SA 333 Grade 1 and 6
• API 5L B, X42, X52, X60, X65
• NACE MR-0175
• EN 10204 3.1.B
• Pipe to A860 Chemistry

Steel Capabilities:

• High Yield Pipe - API 5L X52 including Heavy Walls
• Product for Low Temperature Applications - A/SA 333 Grades 1 and 6, A106 with Charpys
• 50,000 Min Yield Pipe for Construction Applications in ASTM or API Specifications
• ASME Specialists

Product Offerings:

• 1/8" to 24" ODs in standard and line pipe
• Schedule walls including 160 and XXHVY
• Domestic and Import product in stock
• U. S. Steel Distributor

Lengths Available:

• Standard lengths available
• Saw cut lengths through 24" all walls, all grades
• Auto Remnant Program Available
• Beveling available

Owing to our expertise in this domain, we have been able to cater to the variegated requirements of the customers by bringing forth a wide array of Stainless Steel Angle. Developed with precision, these steel angles are manufactured under the guidance of our experts, who are well-versed in this domain. Post-production, the steel angles are tested on various quality grounds to ensure flawlessness.

 

Features:

• Symmetric in dimensions
• Very tough and strong
• Long lasting quality
• Corrosion resistant
• Capable of taking heavy loads
• Requires no maintenance

Kindly send your inquiries to sales@maharashtrametal.co.in

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Features:

• Dimensional accuracy
• Long service life
• Corrosion resistance
• High strength

Specification:

• Grades: ASTM A182 F304, 304L, 304H, 316, 316L, 317, 317L, 321, 310, 347, 904L
• Size: 1/8" NB TO 4" NB. (Socket weld & Threaded)
• Class: 150, 300, 600, 900, 1500, 2000, 3000, 6000, 9000

Stainless Steel Sheets, Cold Rolled, 2B and #4 Finish304 Stainless Steel sheets and plates are ideal for applications where sanitation is critical or where there is a constant risk of corrosion. Stainless steel does not rust, and so it does not need protecting from moisture or chemicals in its immediate vicinity. It will not need painting or finishing, and does not easily discolour over time. It is easy to clean and does not tend to pick up odours. 304 Stainless Steel Sheet 304 stainless steel sheet is a popular and cost-effective form of stainless steel, providing outstanding corrosion resistance and excellent workability despite its durability. It is non-magnetic and comes in different finishes: 2B Mill (dull finish) and #4 (brushed), as well as mirrored and other variations, where required.

Composition and Properties:

• Unlike regular mild steel, 304 Stainless Steel is composed of iron that has been alloyed with a number of different materials. Chief amongst these is Chromium, which comprises around 18 percent, and Nickel (up to 8 percent). Together, these give it one of its other common names, 18/8 Steel. In addition, 304 Stainless Steel contains Manganese (2 percent) and Silicon (1 percent), as well as traces of Carbon, Sulphur and Phosphorus (a fraction of one percent each), and sometimes Molybdenum (0.6 percent).
• 304 Stainless Steel is highly robust but is also easily worked with the right equipment. Depending on the thickness of the sheet or plate, it can be cut, drilled, machined and welded without issue.

Thickness and Finishes:

• 304 Stainless Steel sheets and plates are available in several finishes, but the most common are 2B (milled) finish and #4 (brushed). #8 (mirror finish) is also readily available.
• 2B is a milled finish that is dull grey and semi-smooth to the touch. Like other forms of stainless steel it has excellent corrosion resistance and can be shaped relatively easily with the right tools and techniques. It is suited to applications where these properties are desirable but a brushed/polished finish is not required.
• 4 is a brushed finish that is smoother than 2B. Note that the finish has a direction to the grain, so if your sheet of steel is not square then you will need to specify the direction that you would like the grain to run – across or along the length of the sheet. Like 2B, it offers outstanding resistance to corrosion and is readily workable with the right equipment.
• For the 2B finish, the sheets are passed through a further set of rollers, and for #4 they are brushed to give the distinctive smooth appearance and light grain. A series of other finishes are available, each using additional processes.
• The sheets or plates are available in pre-cut sizes, and with a range of thicknesses, from 0.024-inch (around 1/40 inch or 6mm) up to full inch-thick plate (25.4mm). Sheets can also be custom cut to size, depending on your specific requirements.

Applications:

Stainless steel sheets are perfect for:

 

• Food handling and processing – surfaces and surrounds, such as counters and splashbacks
• Dairy processing plants and milking equipment
• Kitchen appliances and some cookware
• Hospital equipment and surfaces
• Marine hardware
• Kickplates for doors
• Restroom panels
• Other applications in which the strength of steel is required as well as resistance to corrosion

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Leveraging on the support of our dexterous workforce, we are able to put forth an outstanding array of Stainless Steel Circle. These circles are manufactured utilizing quality-approved stainless steel and other basic components that are obtained from accredited vendors of the industry.

 

Applauded for their features like dimensional accuracy, robust design and longer service life, our offered products are widely demanded:

 

• Stainless steel circles are cut to size up to 700 mm Dia
• Grades like SS 304/202/201
• Low Nickel like 0.2%,0.60%, 0.80% & 1.10%

 

Features of stainless steel like:

 

• Non-corrosive
• Non-magnetic
• Attains bright finish on polishing

 

Manufacturing Range CRS Sheet:

 

• Sheet length up to 3000 mm
• Sheet width 254 mm to 600 mm
• Thickness finish 0.30 mm to 1.50 mm
• Finish standard 2B

 

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)